

 P±zϥΥq~,bϥGTouchĲùeݫӼзǵ{Ǧw
   Xʵ{,аѷӥHUBJTwXʵ{qtΤ.



               Linux 7.2 ֤߬ XFREE86 3.3.6 wˤ覡

******************* w    {    ************************

1. Шϥroottκ޲z̵n覡wGTouch ĲùXʵ{Mե,
    pϥΤ@ϥΪ̵niwXʵ{N|LkTw˵{,HɭP
    ĲùLk`ʧ@ϥ.

2. ЩetcؿsW@etandtؿHKƻs{

3. }etcؿUXF86Config(ϥ X Window})

    3-1.  jM"module",W[@Load "xf86kt.so"
            Ҧp:   Section "Module"
            W[      Load "xf86kt.so"
                      EndSection

    3-2.  jM"ServerFlags",W[@AllowMouseOpenFail
            Ҧp:   Section "ServerFlags"
                         AllowMouseOpenFail
                      EndSection

    3-3.  jM"XInput",W[HU:
            Ҧp:  Section "XInput"
                        SubSection "ETANDT"
                          port "/dev/ttyS0"
                          DeviceName "GTOUCH"
                          Mode Absolute
                          AlwaysCore
                          EndSubSection
                      EndSection    
            
            `N: pGsqCom2,
                      port "/dev/ttyS1"  

4.  ƻs{ܹq
     ХT{/etc/XF86ConfigؿO_[ModulePath]lؿ 

     pGo{ؿ: ƻsϺФ(ΥФ)xf86kt.soɮר
                               /etc/XF86Config/ModulePathؿU

     pGo{ؿ: ƻsϺФ(ΥФ)xf86kt.soɮר
                              /usr/X11/lib/modulesإU

5.  ƻs tscpl M swapɮרq 
     tscpl Ĳùե{
     swap ƹkN{
   
     ЦۦW[@ӥؿ,ƻsoGɮרؿ

******************`  N    ********************************

1.  w˹L{Ъ`N^jpgP

2.  pLinux 7.2֤ߪ,Щ X Window
            startx &> startx.out
     tαN|إ  startx.outɮ,iѦ@ɮױo֤ߪ

3.  XFree86 v3.3.6.֤Xʵ{iۮeLinux6.1MLinux7.0@~tΤ



************************************************************
     
  

               GTOUCH Touch screen driver for Linux  XFREE86 3.3.6 Window v1.1
                               Installation guide

Touch screen driver for Linux



1. Please use root account to install and calibrate touch screen driver.
   Will have error if use general user account to install and calibrate touch screen driver.
   Please make /etc/etandt directory for save some initial file for touch screen.

2. Add strings to etc/XF86Config. (let X Window load the driver)
   2.a. Find "module" section, add: Load "xf86kt.so"
        Ex: Section "Module"
                Load "xf86kt.so"
            EndSection

   2.b. Find "ServerFlags" section, add: AllowMouseOpenFail
        Ex: Section "ServerFlags"
                AllowMouseOpenFail
            EndSection

   2.c. Find "XInput" section, and add strings as Ex.
        Ex: Section "XInput"
                SubSection "ETANDT"
                        Port "/dev/ttyS0"
                        DeviceName "GTOUCH"
                        Mode Absolute
                        AlwaysCore
                EndSubSection
            EndSection

   *note: If Touch screen connect at com2 please change: Port "/dev/ttyS1"

3. tscpl is a calibration program for GTOUCH touch screen.

4. swap is a program for swap button definition when touch the panel.

5. Copy driver files to harddrive.
   Please check "Files" section in etc/XF86Config file.
   Find ModulePath line:
   5.1. If not found or had remarked by ";" at front of line:
        Copy xf86kt.so file from floppy to /usr/X11/lib/modules
   5.2. If found:
        Copy xf86kt.so file from floppy to Path defined by ModulePath.

6. Copy tscpl & swap program files to hard drive.
   Please create a directory and copy tscpl & swap program from floppy.

*note: 1. Please notice for Uppercase and Lowercase of character
       2. If still have problem with driver installation, Please
          type run X window with:
               startx &> startx.out
          This will create startx.out with some debug information on it,
          And please send back to us for fix the problem.
       3. Compatible with RedHat Linux 6.1, 7.0 under XFree86 v3.3.6.

************************************************************************